BTR6776 Console Lid Damper Strut – Range Rover P38
The center console cubby box is one of the most frequently used storage areas in the Range Rover P38A (1994 to 2002), and the lid damper strut is the small but essential component responsible for controlling how that lid opens and closes. Without a functioning damper strut, the lid either drops open sharply or refuses to stay at the correct angle, making everyday access to the console storage frustrating and potentially damaging to the lid hinges over time. This replacement damper strut restores the smooth, controlled motion the lid was designed to have, keeping it properly supported when open and closing it gently when released.
Over the years, the original damper strut becomes worn, loses its tension, or simply fails, which is a very common issue on P38A Range Rovers given the age of these vehicles. Replacing it is a straightforward job that requires no special tools and takes only a few minutes, making it one of the easiest interior refresh items available for this generation of Rover. The strut clips into place and immediately restores the proper feel to the cubby box lid, giving the interior a noticeably more refined character consistent with what the P38A was known for when new.
This part is offered as a direct replacement for the original fitment and is compatible with the full production run of the Range Rover P38A. Whether you are completing a full interior restoration or simply correcting a specific annoyance that has developed over time, this damper strut is a sensible and cost-effective solution that makes a real difference in day-to-day usability.
Fits:
• Range Rover P38A (1994 to 2002) 4.0-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 4.6-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 2.5-liter BMW 300Tdi Diesel
Part Number: BTR6776
Free shipping to the lower 48!
No supersessions found.
FAQ
What does the cubby box lid damper strut do on the Range Rover P38A?
The damper strut controls the speed and resistance at which the center console cubby box lid opens and holds its position. When functioning correctly, it prevents the lid from dropping open suddenly and keeps it at a stable angle while you access the storage compartment. A worn or broken strut removes that controlled motion entirely, which is why replacing it makes such a noticeable difference in how the interior feels.
Is this damper strut easy to install without professional help?
Yes, this is one of the simplest interior repairs on the P38A Range Rover. The strut clips into the existing mounting points on the cubby box lid and surround, requiring no special tools and no significant disassembly of the console. Most owners complete the replacement in under ten minutes.
Does this part fit all Range Rover P38A models regardless of engine type?
This damper strut fits all Range Rover P38A variants produced from 1994 to 2002, covering both the petrol/gas V8 variants with the 4.0-liter and 4.6-liter Thor engines as well as the 2.5-liter BMW 300Tdi diesel. Fitment is determined by the interior console design, which was consistent across all engine configurations throughout the P38A production run.
The center console cubby box is one of the most frequently used storage areas in the Range Rover P38A (1994 to 2002), and the lid damper strut is the small but essential component responsible for controlling how that lid opens and closes. Without a functioning damper strut, the lid either drops open sharply or refuses to stay at the correct angle, making everyday access to the console storage frustrating and potentially damaging to the lid hinges over time. This replacement damper strut restores the smooth, controlled motion the lid was designed to have, keeping it properly supported when open and closing it gently when released.
Over the years, the original damper strut becomes worn, loses its tension, or simply fails, which is a very common issue on P38A Range Rovers given the age of these vehicles. Replacing it is a straightforward job that requires no special tools and takes only a few minutes, making it one of the easiest interior refresh items available for this generation of Rover. The strut clips into place and immediately restores the proper feel to the cubby box lid, giving the interior a noticeably more refined character consistent with what the P38A was known for when new.
This part is offered as a direct replacement for the original fitment and is compatible with the full production run of the Range Rover P38A. Whether you are completing a full interior restoration or simply correcting a specific annoyance that has developed over time, this damper strut is a sensible and cost-effective solution that makes a real difference in day-to-day usability.
Fits:
• Range Rover P38A (1994 to 2002) 4.0-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 4.6-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 2.5-liter BMW 300Tdi Diesel
Part Number: BTR6776
Free shipping to the lower 48!
No supersessions found.
FAQ
What does the cubby box lid damper strut do on the Range Rover P38A?
The damper strut controls the speed and resistance at which the center console cubby box lid opens and holds its position. When functioning correctly, it prevents the lid from dropping open suddenly and keeps it at a stable angle while you access the storage compartment. A worn or broken strut removes that controlled motion entirely, which is why replacing it makes such a noticeable difference in how the interior feels.
Is this damper strut easy to install without professional help?
Yes, this is one of the simplest interior repairs on the P38A Range Rover. The strut clips into the existing mounting points on the cubby box lid and surround, requiring no special tools and no significant disassembly of the console. Most owners complete the replacement in under ten minutes.
Does this part fit all Range Rover P38A models regardless of engine type?
This damper strut fits all Range Rover P38A variants produced from 1994 to 2002, covering both the petrol/gas V8 variants with the 4.0-liter and 4.6-liter Thor engines as well as the 2.5-liter BMW 300Tdi diesel. Fitment is determined by the interior console design, which was consistent across all engine configurations throughout the P38A production run.
Original: $55.91
-65%$55.91
$19.57Description
The center console cubby box is one of the most frequently used storage areas in the Range Rover P38A (1994 to 2002), and the lid damper strut is the small but essential component responsible for controlling how that lid opens and closes. Without a functioning damper strut, the lid either drops open sharply or refuses to stay at the correct angle, making everyday access to the console storage frustrating and potentially damaging to the lid hinges over time. This replacement damper strut restores the smooth, controlled motion the lid was designed to have, keeping it properly supported when open and closing it gently when released.
Over the years, the original damper strut becomes worn, loses its tension, or simply fails, which is a very common issue on P38A Range Rovers given the age of these vehicles. Replacing it is a straightforward job that requires no special tools and takes only a few minutes, making it one of the easiest interior refresh items available for this generation of Rover. The strut clips into place and immediately restores the proper feel to the cubby box lid, giving the interior a noticeably more refined character consistent with what the P38A was known for when new.
This part is offered as a direct replacement for the original fitment and is compatible with the full production run of the Range Rover P38A. Whether you are completing a full interior restoration or simply correcting a specific annoyance that has developed over time, this damper strut is a sensible and cost-effective solution that makes a real difference in day-to-day usability.
Fits:
• Range Rover P38A (1994 to 2002) 4.0-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 4.6-liter Thor V8 Petrol/Gas
• Range Rover P38A (1994 to 2002) 2.5-liter BMW 300Tdi Diesel
Part Number: BTR6776
Free shipping to the lower 48!
No supersessions found.
FAQ
What does the cubby box lid damper strut do on the Range Rover P38A?
The damper strut controls the speed and resistance at which the center console cubby box lid opens and holds its position. When functioning correctly, it prevents the lid from dropping open suddenly and keeps it at a stable angle while you access the storage compartment. A worn or broken strut removes that controlled motion entirely, which is why replacing it makes such a noticeable difference in how the interior feels.
Is this damper strut easy to install without professional help?
Yes, this is one of the simplest interior repairs on the P38A Range Rover. The strut clips into the existing mounting points on the cubby box lid and surround, requiring no special tools and no significant disassembly of the console. Most owners complete the replacement in under ten minutes.
Does this part fit all Range Rover P38A models regardless of engine type?
This damper strut fits all Range Rover P38A variants produced from 1994 to 2002, covering both the petrol/gas V8 variants with the 4.0-liter and 4.6-liter Thor engines as well as the 2.5-liter BMW 300Tdi diesel. Fitment is determined by the interior console design, which was consistent across all engine configurations throughout the P38A production run.
