DEFLAMPKIT Light Lamp Lens Kit Defender/Series 3
Every Land Rover Defender and Series 3 that still turns heads on the road or trail owes some of that presence to its lighting. Over years of use, the small round lamp lenses that cover the front side lights, front and rear indicators, and rear stop/tail lights are routinely cracked by stone chips, faded by UV exposure, or simply yellowed with age. A dull or broken lens is not only an MOT or inspection failure waiting to happen, it changes the entire character of the Rover. The DEFLAMPKIT resolves all of that in one purchase, delivering a complete set of eight replacement lenses that cover every position across the front and rear lighting clusters.
The kit includes two clear front side light lenses (589284), four amber indicator lenses (589285) that serve both the front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Together these eight lenses account for every small round lens position on the vehicle, meaning no partial replacement or mismatched sourcing across multiple orders. The lenses are precision-molded to match the profile and lens-to-body sealing geometry of the original units, and they install using the existing screws already on the Rover, requiring no drilling, cutting, or modification of any kind.
Installation is a straightforward process well within the reach of any owner with basic hand tools. Each lens is retained by its original screws, so the job is a matter of removing the old lens, cleaning the housing face, and fitting the new one. No wiring is disturbed and no specialist knowledge is required. The amber indicator lenses serve the front indicator pods mounted in the front wings as well as the rear indicator positions within the tail lamp cluster, so a single part number covers four locations simultaneously.
This kit is well suited to Defender 90, 110, and 130 models through VIN MA940003 as well as all Series 3 models, making it one of the most broadly applicable single-box solutions in the classic Land Rover lighting catalog. Whether the Rover is a daily driver, a weekend off-road machine, or a restoration project, having a full set of correctly colored and optically clear lenses restores legal compliance and period-correct appearance in one session.
Fits:
Defender 90 L316 (1984 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 110 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 130 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Series 3 (1971 to 1985) 2.25-liter Petrol/Gas
Series 3 (1971 to 1985) 2.25-liter Diesel
Part Number: DEFLAMPKIT
Free shipping to the lower 48!
[FAQ]
What vehicles does the DEFLAMPKIT fit?
This kit fits the Defender 90 L316 from 1984 to 1995 up to VIN MA940003, the Defender 110 L316 from 1983 to 1995 up to VIN MA940003, the Defender 130 L316 from 1983 to 1995 up to VIN MA940003, and all Series 3 models produced from 1971 onward. Fitment is limited to vehicles using the earlier separate-lens style lamp clusters. Defenders built after VIN MA940003 use a one-piece molded rear cluster that does not accept individual lens replacement in the same manner, so confirming the VIN before ordering is strongly recommended.
Does this kit include everything needed to replace all the small round lenses on the Rover?
Yes. The DEFLAMPKIT contains all eight lenses required to replace every small round lamp lens position on the vehicle. That means two clear front side light lenses (589284), four amber indicator lenses (589285) covering both front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Bulbs are not included, and the existing housing screws are reused, so no additional hardware is required beyond what is already on the Rover.
How difficult is it to swap out the old lenses?
Lens replacement on these models is one of the simpler jobs in classic Land Rover maintenance. Each lens is held in place by a small number of screws. Removing the old lens, cleaning the housing seating face, and fitting the new lens takes only a few minutes per position. No wiring is involved and no tools beyond a basic screwdriver set are needed. Most owners complete the full set of eight lenses in well under an hour.
Every Land Rover Defender and Series 3 that still turns heads on the road or trail owes some of that presence to its lighting. Over years of use, the small round lamp lenses that cover the front side lights, front and rear indicators, and rear stop/tail lights are routinely cracked by stone chips, faded by UV exposure, or simply yellowed with age. A dull or broken lens is not only an MOT or inspection failure waiting to happen, it changes the entire character of the Rover. The DEFLAMPKIT resolves all of that in one purchase, delivering a complete set of eight replacement lenses that cover every position across the front and rear lighting clusters.
The kit includes two clear front side light lenses (589284), four amber indicator lenses (589285) that serve both the front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Together these eight lenses account for every small round lens position on the vehicle, meaning no partial replacement or mismatched sourcing across multiple orders. The lenses are precision-molded to match the profile and lens-to-body sealing geometry of the original units, and they install using the existing screws already on the Rover, requiring no drilling, cutting, or modification of any kind.
Installation is a straightforward process well within the reach of any owner with basic hand tools. Each lens is retained by its original screws, so the job is a matter of removing the old lens, cleaning the housing face, and fitting the new one. No wiring is disturbed and no specialist knowledge is required. The amber indicator lenses serve the front indicator pods mounted in the front wings as well as the rear indicator positions within the tail lamp cluster, so a single part number covers four locations simultaneously.
This kit is well suited to Defender 90, 110, and 130 models through VIN MA940003 as well as all Series 3 models, making it one of the most broadly applicable single-box solutions in the classic Land Rover lighting catalog. Whether the Rover is a daily driver, a weekend off-road machine, or a restoration project, having a full set of correctly colored and optically clear lenses restores legal compliance and period-correct appearance in one session.
Fits:
Defender 90 L316 (1984 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 110 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 130 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Series 3 (1971 to 1985) 2.25-liter Petrol/Gas
Series 3 (1971 to 1985) 2.25-liter Diesel
Part Number: DEFLAMPKIT
Free shipping to the lower 48!
[FAQ]
What vehicles does the DEFLAMPKIT fit?
This kit fits the Defender 90 L316 from 1984 to 1995 up to VIN MA940003, the Defender 110 L316 from 1983 to 1995 up to VIN MA940003, the Defender 130 L316 from 1983 to 1995 up to VIN MA940003, and all Series 3 models produced from 1971 onward. Fitment is limited to vehicles using the earlier separate-lens style lamp clusters. Defenders built after VIN MA940003 use a one-piece molded rear cluster that does not accept individual lens replacement in the same manner, so confirming the VIN before ordering is strongly recommended.
Does this kit include everything needed to replace all the small round lenses on the Rover?
Yes. The DEFLAMPKIT contains all eight lenses required to replace every small round lamp lens position on the vehicle. That means two clear front side light lenses (589284), four amber indicator lenses (589285) covering both front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Bulbs are not included, and the existing housing screws are reused, so no additional hardware is required beyond what is already on the Rover.
How difficult is it to swap out the old lenses?
Lens replacement on these models is one of the simpler jobs in classic Land Rover maintenance. Each lens is held in place by a small number of screws. Removing the old lens, cleaning the housing seating face, and fitting the new lens takes only a few minutes per position. No wiring is involved and no tools beyond a basic screwdriver set are needed. Most owners complete the full set of eight lenses in well under an hour.
Original: $35.91
-65%$35.91
$12.57Description
Every Land Rover Defender and Series 3 that still turns heads on the road or trail owes some of that presence to its lighting. Over years of use, the small round lamp lenses that cover the front side lights, front and rear indicators, and rear stop/tail lights are routinely cracked by stone chips, faded by UV exposure, or simply yellowed with age. A dull or broken lens is not only an MOT or inspection failure waiting to happen, it changes the entire character of the Rover. The DEFLAMPKIT resolves all of that in one purchase, delivering a complete set of eight replacement lenses that cover every position across the front and rear lighting clusters.
The kit includes two clear front side light lenses (589284), four amber indicator lenses (589285) that serve both the front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Together these eight lenses account for every small round lens position on the vehicle, meaning no partial replacement or mismatched sourcing across multiple orders. The lenses are precision-molded to match the profile and lens-to-body sealing geometry of the original units, and they install using the existing screws already on the Rover, requiring no drilling, cutting, or modification of any kind.
Installation is a straightforward process well within the reach of any owner with basic hand tools. Each lens is retained by its original screws, so the job is a matter of removing the old lens, cleaning the housing face, and fitting the new one. No wiring is disturbed and no specialist knowledge is required. The amber indicator lenses serve the front indicator pods mounted in the front wings as well as the rear indicator positions within the tail lamp cluster, so a single part number covers four locations simultaneously.
This kit is well suited to Defender 90, 110, and 130 models through VIN MA940003 as well as all Series 3 models, making it one of the most broadly applicable single-box solutions in the classic Land Rover lighting catalog. Whether the Rover is a daily driver, a weekend off-road machine, or a restoration project, having a full set of correctly colored and optically clear lenses restores legal compliance and period-correct appearance in one session.
Fits:
Defender 90 L316 (1984 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 110 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Defender 130 L316 (1983 to 1995, up to VIN MA940003) 2.5-liter 200Tdi Diesel
Series 3 (1971 to 1985) 2.25-liter Petrol/Gas
Series 3 (1971 to 1985) 2.25-liter Diesel
Part Number: DEFLAMPKIT
Free shipping to the lower 48!
[FAQ]
What vehicles does the DEFLAMPKIT fit?
This kit fits the Defender 90 L316 from 1984 to 1995 up to VIN MA940003, the Defender 110 L316 from 1983 to 1995 up to VIN MA940003, the Defender 130 L316 from 1983 to 1995 up to VIN MA940003, and all Series 3 models produced from 1971 onward. Fitment is limited to vehicles using the earlier separate-lens style lamp clusters. Defenders built after VIN MA940003 use a one-piece molded rear cluster that does not accept individual lens replacement in the same manner, so confirming the VIN before ordering is strongly recommended.
Does this kit include everything needed to replace all the small round lenses on the Rover?
Yes. The DEFLAMPKIT contains all eight lenses required to replace every small round lamp lens position on the vehicle. That means two clear front side light lenses (589284), four amber indicator lenses (589285) covering both front and rear indicator positions, and two red rear stop and tail light lenses (RTC210). Bulbs are not included, and the existing housing screws are reused, so no additional hardware is required beyond what is already on the Rover.
How difficult is it to swap out the old lenses?
Lens replacement on these models is one of the simpler jobs in classic Land Rover maintenance. Each lens is held in place by a small number of screws. Removing the old lens, cleaning the housing seating face, and fitting the new lens takes only a few minutes per position. No wiring is involved and no tools beyond a basic screwdriver set are needed. Most owners complete the full set of eight lenses in well under an hour.
