LR041680G Elring Intercooler Intake Gasket 3.0 V6
When the seal between the intercooler outlet and the intake manifold fails on a Land Rover 3.0-liter V6 petrol/gas engine, the consequences can be immediate and frustrating. Boost pressure escapes before it reaches the combustion chamber, idle quality deteriorates, power output drops, and the engine may trigger fault codes related to charge air pressure or mass airflow. The Elring OEM intercooler to intake manifold gasket, part number LR041680G, is the factory-specified solution for restoring that critical seal and bringing performance back to where it belongs.
Elring is one of the most respected names in precision gasket manufacturing worldwide, and this part is produced to OEM specification, meaning it meets the exact material, thickness, and dimensional tolerances required by the original Land Rover engineering team. The gasket is designed specifically to seat cleanly between the intercooler pipe outlet and the upper intake manifold on turbocharged and supercharged variants of the 3.0-liter V6 petrol/gas engine family. Its construction withstands the thermal cycling, pressure variations, and underhood temperatures that these engines routinely generate over tens of thousands of miles.
Fitment is exclusive to 3.0-liter V6 petrol/gas configurations. This gasket does not apply to any diesel variant, including 2.7-liter or 3.0-liter turbodiesel engines, nor does it fit any 4.4-liter or 5.0-liter V8 applications. Always confirm your engine code before ordering to ensure compatibility.
Fits:
- LR4/Discovery 4(2014 to 2016) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- D5/Discovery 5 (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Sport L494 (2014 to 2017) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover L405 (2013 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Velar (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
Part Number: LR041680G
Free shipping to the lower 48!
No supersessions found.
FAQ
Does this gasket fit both turbocharged and supercharged 3.0L V6 petrol/gas engines?
Yes. LR041680G fits both forced induction variants of the 3.0-liter AJ-V6 petrol/gas engine where this intercooler to intake manifold interface is present. Always verify your specific engine code to confirm the gasket design matches your application.
What symptoms suggest this gasket needs replacing?
A failing or failed intercooler to intake manifold gasket commonly presents as rough or unstable idle, noticeable loss of power or throttle response, reduced boost pressure, or check engine codes related to charge air or mass airflow. In some cases a faint hiss or whistle under load near the intake area may also be detected.
Is LR041680G a single gasket or part of a larger set?
LR041680G is a single precision gasket covering the intercooler outlet to intake manifold interface. If you are performing a more comprehensive intake service, you may wish to inspect and replace the companion intake to cylinder head gasket, sold separately under a different part number, at the same time to avoid repeat disassembly.
When the seal between the intercooler outlet and the intake manifold fails on a Land Rover 3.0-liter V6 petrol/gas engine, the consequences can be immediate and frustrating. Boost pressure escapes before it reaches the combustion chamber, idle quality deteriorates, power output drops, and the engine may trigger fault codes related to charge air pressure or mass airflow. The Elring OEM intercooler to intake manifold gasket, part number LR041680G, is the factory-specified solution for restoring that critical seal and bringing performance back to where it belongs.
Elring is one of the most respected names in precision gasket manufacturing worldwide, and this part is produced to OEM specification, meaning it meets the exact material, thickness, and dimensional tolerances required by the original Land Rover engineering team. The gasket is designed specifically to seat cleanly between the intercooler pipe outlet and the upper intake manifold on turbocharged and supercharged variants of the 3.0-liter V6 petrol/gas engine family. Its construction withstands the thermal cycling, pressure variations, and underhood temperatures that these engines routinely generate over tens of thousands of miles.
Fitment is exclusive to 3.0-liter V6 petrol/gas configurations. This gasket does not apply to any diesel variant, including 2.7-liter or 3.0-liter turbodiesel engines, nor does it fit any 4.4-liter or 5.0-liter V8 applications. Always confirm your engine code before ordering to ensure compatibility.
Fits:
- LR4/Discovery 4(2014 to 2016) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- D5/Discovery 5 (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Sport L494 (2014 to 2017) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover L405 (2013 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Velar (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
Part Number: LR041680G
Free shipping to the lower 48!
No supersessions found.
FAQ
Does this gasket fit both turbocharged and supercharged 3.0L V6 petrol/gas engines?
Yes. LR041680G fits both forced induction variants of the 3.0-liter AJ-V6 petrol/gas engine where this intercooler to intake manifold interface is present. Always verify your specific engine code to confirm the gasket design matches your application.
What symptoms suggest this gasket needs replacing?
A failing or failed intercooler to intake manifold gasket commonly presents as rough or unstable idle, noticeable loss of power or throttle response, reduced boost pressure, or check engine codes related to charge air or mass airflow. In some cases a faint hiss or whistle under load near the intake area may also be detected.
Is LR041680G a single gasket or part of a larger set?
LR041680G is a single precision gasket covering the intercooler outlet to intake manifold interface. If you are performing a more comprehensive intake service, you may wish to inspect and replace the companion intake to cylinder head gasket, sold separately under a different part number, at the same time to avoid repeat disassembly.
Original: $98.91
-65%$98.91
$34.62Description
When the seal between the intercooler outlet and the intake manifold fails on a Land Rover 3.0-liter V6 petrol/gas engine, the consequences can be immediate and frustrating. Boost pressure escapes before it reaches the combustion chamber, idle quality deteriorates, power output drops, and the engine may trigger fault codes related to charge air pressure or mass airflow. The Elring OEM intercooler to intake manifold gasket, part number LR041680G, is the factory-specified solution for restoring that critical seal and bringing performance back to where it belongs.
Elring is one of the most respected names in precision gasket manufacturing worldwide, and this part is produced to OEM specification, meaning it meets the exact material, thickness, and dimensional tolerances required by the original Land Rover engineering team. The gasket is designed specifically to seat cleanly between the intercooler pipe outlet and the upper intake manifold on turbocharged and supercharged variants of the 3.0-liter V6 petrol/gas engine family. Its construction withstands the thermal cycling, pressure variations, and underhood temperatures that these engines routinely generate over tens of thousands of miles.
Fitment is exclusive to 3.0-liter V6 petrol/gas configurations. This gasket does not apply to any diesel variant, including 2.7-liter or 3.0-liter turbodiesel engines, nor does it fit any 4.4-liter or 5.0-liter V8 applications. Always confirm your engine code before ordering to ensure compatibility.
Fits:
- LR4/Discovery 4(2014 to 2016) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- D5/Discovery 5 (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Sport L494 (2014 to 2017) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover L405 (2013 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
- Range Rover Velar (2017 to 2020) 3.0-liter AJ-V6 Supercharged Petrol/Gas
Part Number: LR041680G
Free shipping to the lower 48!
No supersessions found.
FAQ
Does this gasket fit both turbocharged and supercharged 3.0L V6 petrol/gas engines?
Yes. LR041680G fits both forced induction variants of the 3.0-liter AJ-V6 petrol/gas engine where this intercooler to intake manifold interface is present. Always verify your specific engine code to confirm the gasket design matches your application.
What symptoms suggest this gasket needs replacing?
A failing or failed intercooler to intake manifold gasket commonly presents as rough or unstable idle, noticeable loss of power or throttle response, reduced boost pressure, or check engine codes related to charge air or mass airflow. In some cases a faint hiss or whistle under load near the intake area may also be detected.
Is LR041680G a single gasket or part of a larger set?
LR041680G is a single precision gasket covering the intercooler outlet to intake manifold interface. If you are performing a more comprehensive intake service, you may wish to inspect and replace the companion intake to cylinder head gasket, sold separately under a different part number, at the same time to avoid repeat disassembly.
