Discovery 2 +40mm Extended SS Brake Line Kit DA241440S TF610
When you lift a Discovery 2 L318 (1998-2004), your factory rubber brake hoses simply cannot keep up. Those standard-length hoses were engineered for stock ride height, and any meaningful suspension lift puts them under tension, restricts wheel travel, and creates a genuine safety liability on the trail or the road. This Terrafirma stainless steel braided brake hose kit, part number DA241440S (also known as TF610L), solves that problem with a precision-engineered +40mm (1.57 in) extended length designed to restore proper hose geometry and full suspension articulation without compromise.
Each hose in this complete kit is constructed with a PTFE inner liner surrounded by a stainless steel overbraid and finished with a clear PVC protective outer cover. That construction matters because rubber expands under hydraulic pressure, which introduces a spongy, imprecise feel at the pedal. Stainless steel braid does not expand. The result is a firmer, more immediate pedal response and improved overall braking confidence, whether you are crawling rock gardens, negotiating a muddy green lane, or simply driving on the highway with a lifted Rover.
The kit is designed to fit Discovery 2 L318 models from 1998 through 2004 and accommodates lifts of approximately +40mm (1.57 in). All necessary fittings are included for a proper, direct installation. The hoses carry a Terrafirma part number of TF610L and are cross-referenced as DA241440S, making sourcing and verification straightforward.
Terrafirma is one of the most recognized names in Land Rover performance and protection equipment, with a product range built specifically around the demands of serious off-road use. This kit reflects that reputation: built to a high standard, sized precisely for real-world lift applications, and designed to bolt in cleanly the first time. If you are building a capable overlander or simply want to correct a safety concern on your already-lifted Discovery 2, this is the kit to reach for.
Part Number: DA241440S Free shipping to the lower 48!
[Supersession Part Numbers] Supersessions TF610, TF610L, DA241440
[FAQ]
What Discovery 2 models does this brake hose kit fit?
This kit is designed for the Land Rover Discovery 2 L318, covering all petrol/gas and diesel variants produced from 1998 through 2004 with ABS. It is intended for vehicles with a suspension lift of approximately +40mm (1.57 in). If your Rover is at stock ride height, you would want the standard-length kit instead.
What is included in the kit, and are any additional parts needed?
The kit includes a complete set of stainless steel braided brake hoses with all required fittings for a direct installation. The hoses feature a PTFE inner liner, stainless overbraid, and clear PVC outer cover.
Why upgrade from rubber brake hoses to stainless steel braided lines?
Factory rubber hoses expand slightly under hydraulic pressure, which can give the brake pedal a soft or spongy feel, especially noticeable when braking hard or under demanding conditions. Stainless steel braided hoses resist that expansion, which translates to a firmer, more consistent pedal feel and more precise brake modulation. On a lifted Rover used off-road, the added length also protects against hose tension during full suspension droop.
When you lift a Discovery 2 L318 (1998-2004), your factory rubber brake hoses simply cannot keep up. Those standard-length hoses were engineered for stock ride height, and any meaningful suspension lift puts them under tension, restricts wheel travel, and creates a genuine safety liability on the trail or the road. This Terrafirma stainless steel braided brake hose kit, part number DA241440S (also known as TF610L), solves that problem with a precision-engineered +40mm (1.57 in) extended length designed to restore proper hose geometry and full suspension articulation without compromise.
Each hose in this complete kit is constructed with a PTFE inner liner surrounded by a stainless steel overbraid and finished with a clear PVC protective outer cover. That construction matters because rubber expands under hydraulic pressure, which introduces a spongy, imprecise feel at the pedal. Stainless steel braid does not expand. The result is a firmer, more immediate pedal response and improved overall braking confidence, whether you are crawling rock gardens, negotiating a muddy green lane, or simply driving on the highway with a lifted Rover.
The kit is designed to fit Discovery 2 L318 models from 1998 through 2004 and accommodates lifts of approximately +40mm (1.57 in). All necessary fittings are included for a proper, direct installation. The hoses carry a Terrafirma part number of TF610L and are cross-referenced as DA241440S, making sourcing and verification straightforward.
Terrafirma is one of the most recognized names in Land Rover performance and protection equipment, with a product range built specifically around the demands of serious off-road use. This kit reflects that reputation: built to a high standard, sized precisely for real-world lift applications, and designed to bolt in cleanly the first time. If you are building a capable overlander or simply want to correct a safety concern on your already-lifted Discovery 2, this is the kit to reach for.
Part Number: DA241440S Free shipping to the lower 48!
[Supersession Part Numbers] Supersessions TF610, TF610L, DA241440
[FAQ]
What Discovery 2 models does this brake hose kit fit?
This kit is designed for the Land Rover Discovery 2 L318, covering all petrol/gas and diesel variants produced from 1998 through 2004 with ABS. It is intended for vehicles with a suspension lift of approximately +40mm (1.57 in). If your Rover is at stock ride height, you would want the standard-length kit instead.
What is included in the kit, and are any additional parts needed?
The kit includes a complete set of stainless steel braided brake hoses with all required fittings for a direct installation. The hoses feature a PTFE inner liner, stainless overbraid, and clear PVC outer cover.
Why upgrade from rubber brake hoses to stainless steel braided lines?
Factory rubber hoses expand slightly under hydraulic pressure, which can give the brake pedal a soft or spongy feel, especially noticeable when braking hard or under demanding conditions. Stainless steel braided hoses resist that expansion, which translates to a firmer, more consistent pedal feel and more precise brake modulation. On a lifted Rover used off-road, the added length also protects against hose tension during full suspension droop.
Description
When you lift a Discovery 2 L318 (1998-2004), your factory rubber brake hoses simply cannot keep up. Those standard-length hoses were engineered for stock ride height, and any meaningful suspension lift puts them under tension, restricts wheel travel, and creates a genuine safety liability on the trail or the road. This Terrafirma stainless steel braided brake hose kit, part number DA241440S (also known as TF610L), solves that problem with a precision-engineered +40mm (1.57 in) extended length designed to restore proper hose geometry and full suspension articulation without compromise.
Each hose in this complete kit is constructed with a PTFE inner liner surrounded by a stainless steel overbraid and finished with a clear PVC protective outer cover. That construction matters because rubber expands under hydraulic pressure, which introduces a spongy, imprecise feel at the pedal. Stainless steel braid does not expand. The result is a firmer, more immediate pedal response and improved overall braking confidence, whether you are crawling rock gardens, negotiating a muddy green lane, or simply driving on the highway with a lifted Rover.
The kit is designed to fit Discovery 2 L318 models from 1998 through 2004 and accommodates lifts of approximately +40mm (1.57 in). All necessary fittings are included for a proper, direct installation. The hoses carry a Terrafirma part number of TF610L and are cross-referenced as DA241440S, making sourcing and verification straightforward.
Terrafirma is one of the most recognized names in Land Rover performance and protection equipment, with a product range built specifically around the demands of serious off-road use. This kit reflects that reputation: built to a high standard, sized precisely for real-world lift applications, and designed to bolt in cleanly the first time. If you are building a capable overlander or simply want to correct a safety concern on your already-lifted Discovery 2, this is the kit to reach for.
Part Number: DA241440S Free shipping to the lower 48!
[Supersession Part Numbers] Supersessions TF610, TF610L, DA241440
[FAQ]
What Discovery 2 models does this brake hose kit fit?
This kit is designed for the Land Rover Discovery 2 L318, covering all petrol/gas and diesel variants produced from 1998 through 2004 with ABS. It is intended for vehicles with a suspension lift of approximately +40mm (1.57 in). If your Rover is at stock ride height, you would want the standard-length kit instead.
What is included in the kit, and are any additional parts needed?
The kit includes a complete set of stainless steel braided brake hoses with all required fittings for a direct installation. The hoses feature a PTFE inner liner, stainless overbraid, and clear PVC outer cover.
Why upgrade from rubber brake hoses to stainless steel braided lines?
Factory rubber hoses expand slightly under hydraulic pressure, which can give the brake pedal a soft or spongy feel, especially noticeable when braking hard or under demanding conditions. Stainless steel braided hoses resist that expansion, which translates to a firmer, more consistent pedal feel and more precise brake modulation. On a lifted Rover used off-road, the added length also protects against hose tension during full suspension droop.
