XFK100290 Rear Door Stop Lamp Cover – Defender & Disco
The raised stop lamp cover fitted to the rear door of the Defender and Discovery serves both a protective and aesthetic function, housing the high-mounted stop lamp assembly and maintaining the clean, purposeful look of the rear door exterior. Over time these covers become cracked, faded, or broken through UV exposure, off-road use, or the general wear that comes with decades of service on a working Rover. When the cover is damaged, the lamp assembly behind it is left exposed to the elements, which can lead to water ingress, lamp failure, and a rear door that simply does not present well. Replacing the cover promptly keeps the stop lamp protected and the rear end of the Rover looking as it should.
Part number XFK100290 is the current active part number for this cover and directly supersedes the earlier part number BTR4414, which has been discontinued. If you have been searching under the old number without success, this is the correct replacement to order. The cover is designed as a direct fit to the original mounting points on the rear door, requiring no modification or adaptation, and restores the factory appearance immediately upon installation.
This cover is compatible with a both Defender and Discovery models spanning several decades of production, covering both Station Wagon and Hardtop body styles on the Defender 90 and Defender 110 as well as the North American Specification variants of each. It also fits the Discovery 1 and Discovery 2, which share the same raised stop lamp housing design on the rear tailgate. Whether you are refreshing a well-used daily driver, completing a cosmetic restoration, or sourcing parts for a customer build, XFK100290 is the current correct part for the job.
Fits:
Defender 90 (1990 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 90 NAS (1993 to 1997) Station Wagon Petrol/Gas
Defender 110 (1983 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 110 NAS (1993 to 1997) Station Wagon Petrol/Gas
Discovery 1 L300 (1989 to 1998) Petrol/Gas and Diesel
Discovery 2 L318 (1998 to 2004) Petrol/Gas and Diesel
Part Number: XFK100290
Free shipping to the lower 48!
Supersessions: BTR4414
FAQ
What is the difference between part number XFK100290 and the older BTR4414?
These two part numbers refer to the same component. BTR4414 was the original Land Rover part number for this rear door raised stop lamp cover, and XFK100290 is the current superseding number that replaced it when BTR4414 was discontinued. The cover itself is the same fitment and serves the same purpose. If you have been searching for BTR4414 and finding it unavailable, XFK100290 is the correct active replacement to order.
Does this cover fit both Defender and Discovery models?
Yes. The raised stop lamp cover design was shared across several Land Rover platforms during this production era. XFK100290 fits the Defender 90 and Defender 110 in both Station Wagon and Hardtop configurations, including the North American Specification versions of each, as well as the Discovery 1 L300 and Discovery 2 L318. It is worth confirming your specific body style before ordering, as Hardtop and Station Wagon fitment is noted separately for Defender variants.
Is this a straightforward replacement that can be done without removing the rear door trim?
In most cases, yes. The raised stop lamp cover is secured to the exterior of the rear door and can typically be replaced without removing interior door trim panels. The lamp assembly will need to be disconnected before the old cover is removed, which is a simple unplug operation on both Defender and Discovery models. The new cover clips or bolts into the original mounting points and the lamp reconnects directly, making this a manageable job for most Rover owners with basic hand tools.
The raised stop lamp cover fitted to the rear door of the Defender and Discovery serves both a protective and aesthetic function, housing the high-mounted stop lamp assembly and maintaining the clean, purposeful look of the rear door exterior. Over time these covers become cracked, faded, or broken through UV exposure, off-road use, or the general wear that comes with decades of service on a working Rover. When the cover is damaged, the lamp assembly behind it is left exposed to the elements, which can lead to water ingress, lamp failure, and a rear door that simply does not present well. Replacing the cover promptly keeps the stop lamp protected and the rear end of the Rover looking as it should.
Part number XFK100290 is the current active part number for this cover and directly supersedes the earlier part number BTR4414, which has been discontinued. If you have been searching under the old number without success, this is the correct replacement to order. The cover is designed as a direct fit to the original mounting points on the rear door, requiring no modification or adaptation, and restores the factory appearance immediately upon installation.
This cover is compatible with a both Defender and Discovery models spanning several decades of production, covering both Station Wagon and Hardtop body styles on the Defender 90 and Defender 110 as well as the North American Specification variants of each. It also fits the Discovery 1 and Discovery 2, which share the same raised stop lamp housing design on the rear tailgate. Whether you are refreshing a well-used daily driver, completing a cosmetic restoration, or sourcing parts for a customer build, XFK100290 is the current correct part for the job.
Fits:
Defender 90 (1990 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 90 NAS (1993 to 1997) Station Wagon Petrol/Gas
Defender 110 (1983 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 110 NAS (1993 to 1997) Station Wagon Petrol/Gas
Discovery 1 L300 (1989 to 1998) Petrol/Gas and Diesel
Discovery 2 L318 (1998 to 2004) Petrol/Gas and Diesel
Part Number: XFK100290
Free shipping to the lower 48!
Supersessions: BTR4414
FAQ
What is the difference between part number XFK100290 and the older BTR4414?
These two part numbers refer to the same component. BTR4414 was the original Land Rover part number for this rear door raised stop lamp cover, and XFK100290 is the current superseding number that replaced it when BTR4414 was discontinued. The cover itself is the same fitment and serves the same purpose. If you have been searching for BTR4414 and finding it unavailable, XFK100290 is the correct active replacement to order.
Does this cover fit both Defender and Discovery models?
Yes. The raised stop lamp cover design was shared across several Land Rover platforms during this production era. XFK100290 fits the Defender 90 and Defender 110 in both Station Wagon and Hardtop configurations, including the North American Specification versions of each, as well as the Discovery 1 L300 and Discovery 2 L318. It is worth confirming your specific body style before ordering, as Hardtop and Station Wagon fitment is noted separately for Defender variants.
Is this a straightforward replacement that can be done without removing the rear door trim?
In most cases, yes. The raised stop lamp cover is secured to the exterior of the rear door and can typically be replaced without removing interior door trim panels. The lamp assembly will need to be disconnected before the old cover is removed, which is a simple unplug operation on both Defender and Discovery models. The new cover clips or bolts into the original mounting points and the lamp reconnects directly, making this a manageable job for most Rover owners with basic hand tools.
Description
The raised stop lamp cover fitted to the rear door of the Defender and Discovery serves both a protective and aesthetic function, housing the high-mounted stop lamp assembly and maintaining the clean, purposeful look of the rear door exterior. Over time these covers become cracked, faded, or broken through UV exposure, off-road use, or the general wear that comes with decades of service on a working Rover. When the cover is damaged, the lamp assembly behind it is left exposed to the elements, which can lead to water ingress, lamp failure, and a rear door that simply does not present well. Replacing the cover promptly keeps the stop lamp protected and the rear end of the Rover looking as it should.
Part number XFK100290 is the current active part number for this cover and directly supersedes the earlier part number BTR4414, which has been discontinued. If you have been searching under the old number without success, this is the correct replacement to order. The cover is designed as a direct fit to the original mounting points on the rear door, requiring no modification or adaptation, and restores the factory appearance immediately upon installation.
This cover is compatible with a both Defender and Discovery models spanning several decades of production, covering both Station Wagon and Hardtop body styles on the Defender 90 and Defender 110 as well as the North American Specification variants of each. It also fits the Discovery 1 and Discovery 2, which share the same raised stop lamp housing design on the rear tailgate. Whether you are refreshing a well-used daily driver, completing a cosmetic restoration, or sourcing parts for a customer build, XFK100290 is the current correct part for the job.
Fits:
Defender 90 (1990 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 90 NAS (1993 to 1997) Station Wagon Petrol/Gas
Defender 110 (1983 to 2016) Station Wagon and Hardtop Petrol/Gas and Diesel
Defender 110 NAS (1993 to 1997) Station Wagon Petrol/Gas
Discovery 1 L300 (1989 to 1998) Petrol/Gas and Diesel
Discovery 2 L318 (1998 to 2004) Petrol/Gas and Diesel
Part Number: XFK100290
Free shipping to the lower 48!
Supersessions: BTR4414
FAQ
What is the difference between part number XFK100290 and the older BTR4414?
These two part numbers refer to the same component. BTR4414 was the original Land Rover part number for this rear door raised stop lamp cover, and XFK100290 is the current superseding number that replaced it when BTR4414 was discontinued. The cover itself is the same fitment and serves the same purpose. If you have been searching for BTR4414 and finding it unavailable, XFK100290 is the correct active replacement to order.
Does this cover fit both Defender and Discovery models?
Yes. The raised stop lamp cover design was shared across several Land Rover platforms during this production era. XFK100290 fits the Defender 90 and Defender 110 in both Station Wagon and Hardtop configurations, including the North American Specification versions of each, as well as the Discovery 1 L300 and Discovery 2 L318. It is worth confirming your specific body style before ordering, as Hardtop and Station Wagon fitment is noted separately for Defender variants.
Is this a straightforward replacement that can be done without removing the rear door trim?
In most cases, yes. The raised stop lamp cover is secured to the exterior of the rear door and can typically be replaced without removing interior door trim panels. The lamp assembly will need to be disconnected before the old cover is removed, which is a simple unplug operation on both Defender and Discovery models. The new cover clips or bolts into the original mounting points and the lamp reconnects directly, making this a manageable job for most Rover owners with basic hand tools.
